Interior Painting

Published by: Karen Zabel
Published on: 2010-01-10 15:26:13

Interior painting in Connecticut is one of the simplest and least expensive ways to create dramatic changes in the appearance and character of your home. Some of the most popular painting techniques are described below. Most of these techniques use more than one color of paint to achieve the appearance of depth and texture. Glazing compound is usually used to thin the consistency of the paint to allow it to be applied in thinner layers, and to prevent it from drying too rapidly.

Before you start on any painting project, remember: don't skimp on preparation. Sand off flaking paint and fill holes with spackle. Cover all surfaces you want to protect with a good drop cloth, wipe down your walls and remove any grease, handprints or dirt and tape all trim edges, switch plates, outlets and knobs before you open that first can of paint. And if you have any doubts in how to complete the job, contact a professional painter in Connecticut to help you.

Rag rolling
The rag rolling technique uses a special fabric cover for your roller to either apply color (ragging on) or to remove paint that has already been applied to the wall surface (ragging off). Some painters prefer to use damp rags loosely balled up and held in the hand to apply or remove paint, instead of using a roller cover.

Sponging
Like the handheld rag technique, sponging uses the ragged texture of a dampened natural sea sponge to achieve a mottled effect on walls and ceilings by adding or removing layers of paint. Both sponging and ragging techniques require practice to make sure you are able to achieve consistency over a large surface.

"Leather" look
This technique can be a little more difficult to master than ragging or sponging, but with a little practice, the results can be spectacular. The key is to work in small areas – no larger than 3' by 3' for best results. In this method, while glaze or paint is still wet in the treatment area, sheets of plastic wrap are applied to the surface and then removed to achieve the lines and wrinkles common in aged leather. This effect can also be achieved using strips of chamois cloth, stacked up and tied in the middle. Holding the strips up by the center, the appearance is that of a loose mop head. Dampen the chamois mop head and scrunch it gently in your hand, applying the ends of the chamois to the wall to remove some of the paint or glaze.

Color glazing
One of the simplest techniques to complete, color glazing involves the use of a base coat of one color of paint, with one or more layers of different colors of paint, thinned with glaze, on top. By thinning the upper coats with glaze, the base coat can show through, creating the illusion of depth. Color glazing is often combined with ragging or sponging on the uppermost layer of color.

A fresh, interior paint job can change the look of a room and create a completely different feel for your home. And one of the best things about paint is its relative low cost: even if you don't achieve the look you want with one technique, it's a simple matter to cover it up and start all over again.

Get in touch with a painting contractor in Connecticut to make your home look like new!

View all Painting Staining Articles